Configuring Communication Connections
4.5Configuring ISO-on-TCP Connections Properties
Introduction
When you create a connection in the New dialog, you specify the connection type and, as far as possible, the connection partner.
When necessary, you can adapt other connection partners that are set as default when you create a new connection as described below.
Opening the Dialog
To call the dialog for special connection properties, follow the steps outlined below:
1.Select the required connection in the connection table.
2.Select the menu option Edit " Object Properties
Result: The “Properties
Tabs
The following tabs are available for
SGeneral
Displays parameters that identify the connection.
SAddresses
Displays the local and remote address information.
SOptions
Here, you can decide whether or not you want to use the connection for one of the access types FETCH or WRITE.
SOverview
This is an overview of all the configured
SStatus Information
This tab displays the current status information for the connection (valid at the time the dialog is opened). This information corresponds to that displayed by NCM diagnostics.
112 | SIMATIC NET NCM S7 for Industrial Ethernet |
Release 6/2003 |