Replacing the Toner Cartridge
If the print remains light after redistributing toner (see page 4.3), replace the toner cartridge.
Remove the old cartridge and install a new toner cartridge. See “Installing the Toner Cartridge” on page 2.4.
Using the Toner Save Mode
The Toner Save mode allows the printer to use less toner on each page. Selecting this option will extend the life of your toner cartridge and reduce your cost per page, but will reduce print quality.
There are two ways to enable the Toner Save mode:
From the Control Panel
Press the Cancel button on the control panel. The printer must be in Ready mode (On Line/Error green LED is on).
•If the Toner Save LED is on, the mode is enabled and the printer uses less toner to print a page.
•If the Toner Save LED is off, the mode is disabled and the printer prints in the normal mode.
From the Printer Properties
You can also enable the Toner Save mode in the Graphic tab of the printer properties. For details, see Software User’s Guide.
