For Card Stock or Custom-sized materials:

-Postcards, 3.5 by 5.83 in.(index) cards and other custom- sized materials can be printed with this printer. The minimum size is 76 by 127mm(3.0 by 5.0 in.) and the maximum size is 216 by 356mm(8.5 by 14 in.)

-Always insert the short-edge into the manual tray first. If you want to print in landscape mode, make this selection through your software. Inserting paper long-edge first may cause a paper jam.

- Do not print on media smaller than 76mm (3.0 in.) wide or

3

127mm(5.0 in.) long.

• For preprinted paper:

- Letterheads must be printed with heat-resistant ink that will not melt, vaporize, or release hazardous emissions when subjected to the printer’s fusing temperature of 205 °C (400 °F) for 0.1 second.

- Ink on letterheads must be non-flammable and should not adversely affect any printer rollers.

- Forms and letterheads should be sealed in a moisture-proof wrapping to prevent changes during storage.

- Before you load preprinted paper as forms and letterheads, verify that the ink on the paper is dry. During the fusing process, wet ink can come off preprinted paper.

• Do not use Carbonless paper and Tracing paper. Use of these types of paper could result in chemical smells and could damage your printer.

USING PRINT MATERIALS 3.5

Page 38
Image 38
Samsung ML-2010 Series manual Using Print Materials