Manuals / Q-Logic / Computer Equipment / Switch

Q-Logic 5600 manual Remote Logging, NTP Client

Models: 5600

1 336

Download 336 pages 25.61 Kb

Page 137

A

4 – Managing Switches Configuring a Switch

4.7.6.2

Remote Logging

The Remote Logging (syslog) feature enables saving of the log information to a remote host that supports the syslog protocol. When enabled, the log entries are sent to the syslog host at the IP address that you specify in the Logging Host IP Address field. Log entries are saved in the internal switch log whether this feature is enabled or not.

To save log information to a remote host, you must edit the syslog.conf file (located on the remote host) and then restart the syslog daemon. Consult your operating system documentation for information on how to configure Remote Logging. The syslog.conf file on the remote host must contain an entry that specifies the name of the log file in which to save error messages. Add the following line to the syslog.conf file. A <tab> separates the selector field (local0.info) and action field which contains the log file path name (/var/adm/messages/messages.name).

local0.info <tab> /var/adm/messages.name

4.7.6.3

NTP Client

The NTP Client feature allows switches to synchronize their date and time with a centralized server. NTP client ensures the consistency of date and time stamps in alarms and log entries. An Ethernet connection to NTP server is required. Refer to ”Setting the Date/Time and Enabling NTP Client” on page 4-16for more information.

59097-02 B

4-31

Image 137

Q-Logic 5600 manual Remote Logging, NTP Client

Contents

SANbox 5600 Series Switch Managment User’s Guide Document Revision History SANbox 5600 Series Switch Management User’s GuideTable of Contents Section Managing Fabrics SANbox 5600 Series Switch Management User’s Guide Section Managing SwitchesSANbox 5600 Series Switch Management User’s Guide Section Managing Ports Appendix a Command Line Interface Glossary Index List of Figures List of Tables SANbox 5600 Series Switch Management User’s Guide Jdom License Intended AudienceRelated Materials Introduction Jdom License Training Technical SupportAvailability Support Headquarters Contact InformationUsing SANsurfer Switch Manager Workstation Requirements Installing the Management ApplicationWorkstation Requirements SANsurfer Switch Manager SANsurfer Management Suite SMS Installation for WindowsChglax.bat SMS Installation for Linux SMS Installation for Solaris Locate and execute the file sbmoversms.sh Install the new SANsurfer Switch Manager packageChange directories to the package location ‰ For Linux or Solaris enter the SANsurfer command Starting SANsurfer Switch ManagerInitial Startup Dialog SANsurfer Switch Manager Window Save Default Fabric View File Dialog Exiting SANsurfer Switch ManagerLoad Default Fabric File Dialog Uninstalling SANsurfer Switch ManagerStandalone Uninstall SMS UninstallSaving and Opening Fabric View Files Changing the Encryption Key for the Default Fabric View FileSetting SANsurfer Switch Manager Preferences Viewing Software Version and Copyright Information Using Online HelpFaceplate Display SANsurfer Switch Manager User InterfaceTopology Display Menu Menu BarsShortcut Keys Faceplate Display MenuTool Bar Buttons Tool BarFabric Tree Fabric TreeData Window and Tabs Working Status IndicatorGraphic Window Switch and Link Status Using the Topology DisplayArranging Switches in the Display Working with Switches and LinksSelecting Switches and Links Topology Data Windows Opening the Faceplate and Topology Display Popup Menus11. Faceplate Display Using the Faceplate DisplaySelecting Ports Port Views and StatusWorking with Ports Faceplate Data Windows Opening the Faceplate Popup MenuPage Radius Servers Managing FabricsAdd Server Adding a Radius ServerManaging Fabrics Radius Servers Remove Server Removing a Radius ServerEdit Server Information Editing Radius Server InformationModify Authentication Order Radius Server Information Modifying Authentication Order Radius Server InformationFabric security consists of the following Securing a FabricConnection Security User Account Security Security Consistency ChecklistDevice Security Edit Security Dialog Edit Security DialogCreating a Security Set Creating a Security Group Create Security Group DialogCreate a Security Group Member Dialog Create Security Group Member DialogManaging Fabrics Securing a Fabric Creating a Security Group Member Editing the Security Configuration on a Switch Viewing Properties of a Security Set, Group, or Member Using the Security Config DialogDeactivating a Security Set Archiving a Security Configuration to a FileActivating a Security Set Active Security Data Window Configured Security Data WindowFabric Services Click the In-band Management Enable button Enabling Snmp ConfigurationEnabling In-band Management Tracking Fabric Firmware and Software VersionsViewing and Comparing Version Snapshots Saving a Version SnapshotFabric Version Snapshot Analysis Dialog Exporting Version Snapshots to a FileAdding a Fabric Managing the Fabric DatabaseOpening a Fabric View File Removing a FabricRediscovering a Fabric Deleting Switches and LinksSaving a Fabric View File Adding a New Switch to a Fabric Replacing a Failed Switch Displaying Fabric Information Fabric Status Topology Display Switch and Status Icons11. Events Browser Displaying the Event BrowserEditor or browser Discarded when you close a SANsurfer Switch Manager sessionSeverity Levels 12. Filter Events Dialog Filtering the Event BrowserSaving the Event Browser to a File Sorting the Event BrowserDevices Data Window Entries Devices Data Window13. Active Zone Set Data Window Active Zone Set Data WindowDisplaying Detailed Device Information Link Data WindowWorking with Device Information and Nicknames Creating a Nickname Exporting Device Information to a FileManaging Device Port Nicknames Exporting Nicknames to a File Editing a NicknameDeleting a Nickname Zoning Concepts Importing a Nicknames FileZoning a Fabric Soft Zones ZonesZone Sets Access Control List Hard ZonesAliases Viewing Zoning Limits and Properties Zoning DatabaseUsing the Zoning Wizard Managing the zoning database consists of the following Managing the Zoning DatabaseEditing the Zoning Database Edit Zoning Dialog Tool Bar Buttons and Icons Edit Zoning Dialog Tool Bar Buttons and Icons Interop Auto Save Configuring the Zoning DatabaseDiscard Inactive Default VisibilitySaving the Zoning Database to a File Restoring the Zoning Database from a FileRemoving All Zoning Definitions Restoring the Default Zoning DatabaseCreating a Zone Set Managing Zone SetsRemoving a Zone from a Zone Set or from All Zone Sets Activating and Deactivating a Zone SetCopying a Zone to a Zone Set Managing zones involves the following Removing a Zone SetManaging Zones Creating a Zone in a Zone Set Adding Zone Members Removing a Zone Member Renaming a Zone or a Zone SetRemoving a Zone from a Zone Set Removing a Zone from All Zone SetsCreating an Alias Changing Zone TypesManaging Aliases Removing an Alias from All Zones Adding a Member to an AliasZone Merge Failure Merging Fabrics and ZoningZone Merge Failure Recovery Managing Fabrics Zoning a Fabric 59097-02 B Managing Switches Factory User Accounts Managing User AccountsCreating User Accounts User Account Administration Dialog Add AccountRemoving a User Account User Account Administration Dialog Remove AccountUser Account Administration Dialog Change Password Changing a User Account PasswordModifying a User Account User Account Administration Dialog Modify AccountFaceplate Display Switch Information Displaying Switch InformationSwitch Data Window Entries Switch Data WindowRatov Switch Data Window Entries Ing Detailed Device Information on page 3-36for infor Port Information Data Window Port Statistics Data WindowConfigured Zonesets Data Window Configured Zonesets Data WindowsPort Threshold Alarm Configuration Dialog Configuring Port Threshold AlarmsPort Threshold Alarm Example Paging a SwitchResetting a Switch Setting the Date/Time and Enabling NTP ClientType Description Switch ResetsUsing the Configuration Wizard Configuring a SwitchSymbolic Name Switch PropertiesSwitch Administrative States Switch Administrative StatesDomain ID and Domain ID Lock Fabric Device Management Interface In-band Management Broadcast Support10. Advanced Switch Properties Dialog Advanced Switch PropertiesLegacy Port Address Format Interop Mode for ZoningTimeout Values Timeout Values11. System Services Dialog System Services DialogSecurity Consistency Checklist Dialog 12. Network Properties Dialog Network PropertiesIP Configuration Parameters IP ConfigurationNTP Client Remote Logging13. Snmp Properties Dialog Snmp PropertiesSnmp Configuration Parameters Snmp ConfigurationSnmp Trap Configuration Parameters Snmp Trap Configuration14. Switch Stacks Managing Switch Stacks15. Syslog Dialog SyslogSelect Source Dialog Archiving a Switch16. Restore Dialogs Full and Selective Restoring a SwitchManaging Switches Restoring a Switch Factory Default Configuration Settings Restoring the Factory Default ConfigurationFactory Default Configuration Settings Downloading a Support File Upgrading the Switch Using License Keys17. Features License Key Dialog Installing Firmware 19. Hardware Status LEDs Displaying Hardware StatusManaging Switches Displaying Hardware Status 59097-02 B Displaying Port Information Managing PortsPort Types Monitoring Port StatusDisplaying Port Types Displaying Port Speeds Displaying Port Operational StatesPort Operational States Port SpeedsPort Transceiver Media View Displaying Transceiver Media StatusPort Statistics Data Window Entries LIP ALPD,ALPS Port Statistics Data Window Entries Port Information Data Window Entries Port Information Data Window Entries Port Properties Dialog Configuring PortsPort Administrative States Changing Port Administrative StatesChanging Port Speeds Changing Port Types Device Scan Changing Port Symbolic NameStream Guard Using the Extended Credits Wizard Designate Donor Ports Resetting a PortPort Loopback Test Dialog Testing PortsManaging Ports Testing Ports Fabric View Graphs Graphing Port PerformanceStarting SANsurfer Performance Viewer This section describes how to do the followingExiting SANsurfer Performance Viewer Save Default Performance View File DialogSaving and Opening Performance View Files Load Default View File DialogSetting SANsurfer Performance Viewer Preferences Changing the Default Performance View File Encryption KeyDisplaying Graphs for a Switch Setting the Polling FrequencyArranging Graphs in the Display Displaying Graphs for a StackCustomizing Graphs Default Graph Options DialogManaging Ports Graphing Port Performance Rescaling a Selected Graph Setting Global Graph TypePrinting Graphs Saving Graph Statistics to a FileLogging On to a Switch Command Line InterfaceUser Accounts Working with Switch ConfigurationsModifying a Configuration Backing up and Restoring Switch Configurations Ftp ipaddress userimages password images ftp bin Table A-1. Command-Line Completion CommandsAdmin Session Commands Table A-2. Commands Listed by Authority LevelAuthority Admin CommandSyntax KeywordsSyntax alias Alias CommandKeywords add alias memberlist Copy aliassource aliasdestinationList Delete aliasMembers alias Remove alias memberlistCIM Command Following is an example of the CIM Limits command Table A-3. CIM Listener Configuration Parameters CIMListener CommandURL Edit listenernameTable A-4. CIM Subscription Configuration Parameters CIMSubscription CommandSyntax cimsubscription Keywords create subscriptionnameEdit subscriptionname Keywords activate configname Config CommandSyntax config Save configname Edit confignameRestore #ftp symbolicname or ipaddress user images Syntax create certificate support Create CommandKeywords certificate SupportLocal directory now /itasca/conf/images bin SANbox xxxx admin # create support Following is an example of the Create Certificate commandKeywords MMDDhhmmCCYY Date CommandSyntax date Syntax feature Feature CommandKeywords add licensekey LogSyntax firmware install Firmware Install CommandAuthority Admin Syntax group Group CommandTable A-5. ISL Group Member Attributes Keywords add groupTable A-6. Port Group Member Attributes Table A-7. MS Group Member Attributes Configures security for attachments to other switchesCopy groupsource groupdestination Create group typeTable A-8. Group Member Attributes Edit group memberRemove group memberlist Members groupRename groupold groupnew Securitysets groupISL Following is an example of the Group Edit commandFollowing is an example of the Group Members command Following is an example of the Group List commandSyntax Hardreset CommandHelp command keyword Help CommandCommand KeywordHistory History CommandFollowing is an example of the History command Hotreset Hotreset CommandSyntax image Image CommandKeywords cleanup Ftp Ftp switchname Wait for the unpack to complete Admin session Lip CommandFollowing is an example of the Lip command Lip portnumberSyntax passwd accountname Keywords accountname Passwd CommandFollowing is an example of a successful Ping command Ping CommandPing ipaddress IpaddressExamples The following is an example of the Ps command Ps CommandAuthority None Syntax ps Displays current system process informationAuthority None Quit CommandCloses the Telnet session Syntax quit, exit, or logoutSyntax reset Reset CommandKeywords config configname FactorySwitch ServicesRadius SecurityValues Table A-9. Switch Configuration DefaultsParameter 4-Gbps Port Defaults Table A-10. Port Configuration DefaultsTable A-11. Port Threshold Alarm Configuration Defaults Table A-13. Snmp Configuration Defaults Table A-12. Zoning Configuration DefaultsTable A-15. Services Configuration Defaults Table A-14. Radius Configuration DefaultsTable A-17. Security Configuration Defaults Table A-16. System Configuration DefaultsKeywords active Security CommandEdit MD5 Following is an example of the Security History commandFollowing is an example of the Security List command Following is an example of the Security Limits commandSecurityset Command Deactivate Create securitysetDelete securityset Groups securitysetFollowing is an example of the Securityset List command Following is an example of the Securityset Groups commandKeywords alarm option Set CommandConfig option Syntax setSwitch state Setup optionLog option Pagebreak stateTimezone Set config Set Config CommandTable A-18. Set Config Port Parameters Port portnumberSend Arbff True instead of IDLEs False on the loop Table A-18. Set Config Port Parameters Table A-20. Set Config Switch Parameters Table A-19. Security Configuration ParametersResource Allocation Timeout Value. The number Threshold Table A-21. Set Config Threshold ParametersTable A-22. Set Config Zoning Parameters Arbff Following is an example of the Set Config Port commandEnter key to do so Configuring Port Number AdminState Following is an example of the Set Config Switch command Following is an example of the Set Config Security commandFollowing is an example of the Set Config Threshold command Following is an example of the Set Config Zoning command Set log Set Log CommandArchive Component filterlistDisplay filter Port portlist Level filterStart Alarms are always logged and always displayed on the screenStop Stops logging of eventsSet Port Command State state Disables the port by removing power from the port lasersSet setup Set Setup CommandRadius Services Snmp System Configuration fieldsTable A-23. Radius Service Settings Table A-24. Switch Services Settings Table A-24. Switch Services Settings Table A-25. Snmp Configuration Settings Table A-26. System Configuration Settings Table A-26. System Configuration Settings Following is an example of the Set Setup Services command Following is an example of the Set Setup Snmp command Following is an example of the Set Setup System command Keywords about Show CommandCimsubscription subscriptionname Alarm optionCimlistener listenername Interface Fdmi portwwnLog option LsdbTable A-27. Show Port Parameters PagebreakPerf option Lipalpdalps Steering domainid Post logTable A-28. Switch Operational Parameters Topology Displays the current time zone settingDisplays all connected devices UsersFollowing is an example of the Show Fdmi command Following is an example of the Show Domains commandFollowing is an example of the Show Fabric command Following is an example of the Show NS local domain command Following is an example of the Show Fdmi WWN commandFollowing is an example of the Show Interface command Following is an example of the Show NS domainID commandFollowing is an example of the Show NS portID command PL-XPL-VC-SG3-22 Following is an example of the Show Port commandFollowing is an example of the Show Topology command Following is an example of the Show Switch command59097-02 B 105 Following is an example of the Show Version command Show config Show Config CommandFollowing is an example of the Show Config Port command Following is an example of the Show Config Switch command Following is an example of the Show Config Zoning command Following is an example of the Show Config Threshold commandNone Show Log CommandShow log Keywords numberofeventsDisplays all informative events Displays all warning events Snmp eventsDisplays all critical events Displays all events related to EPortsLevel SettingsOptions PortFollowing is an example of the Show Log command Show Perf Command Outframe portnumber Errors portnumberFollowing is an example of the Show Perf Byte command Mfg Show Setup CommandShow setup Following is an example of the Show Setup Radius command Following is an example of the Show Setup Services commandFollowing is an example of the Show Setup Snmp command Following is an example of the Show Setup System command Syntax shutdown Shutdown CommandPort portnumber testtype cancel Status Test CommandSyntax test Keywords port portnumber testtypeStatus Cancels the online test in progressTest port x online Authority None Syntax uptime Uptime CommandExamples The following is an example of the Uptime command Syntax user User CommandKeywords accounts AddFollowing is an example of the User Edit command Following is an example of the User Accounts commandFollowing is an example of the User Add command Following is an example of the User List command Following is an example of the User Delete commandAuthority None Syntax whoami Whoami CommandExamples The following is an example of the Whoami command Syntax zone Zone CommandKeywords add zone memberlist Copy zonesource zonedestinationMembers zone Delete zoneRemove zone memberlist Rename zoneold zonenewFollowing is an example of the Zone Members command Following is an example of the Zone Zonesets command Syntax zoneset Zoneset CommandRemove zoneset zonelist Delete zonesetRename zonesetold zonesetnew Zones zonesetFollowing is an example of the Zoneset Zones command Opens a Zoning Edit session Zoning CommandLimit Description Table A-29. Zoning Database LimitsE2JBOD2 Following is an example of the Zoning Limits commandFollowing is an example of the Zoning List command Command Line Interface Zoning Command 142 59097-02 B Administrative State Access Control List ZoneAlarm BootPConfigured Zone Sets Class 3 ServiceDefault Visibility Fabric Management SwitchInter-Switch Link Input Power LEDMaintenance Button Maintenance ModeSoft Zone Small Form-Factor Pluggable Zoning DatabaseTarget User AccountIndex Index-2 59097-02 B 59097-02 B Index-3 Index-4 59097-02 B 59097-02 B Index-5 Index-6 59097-02 B 59097-02 B Index-7 Index-8 59097-02 B 59097-02 B Index-9 Index-10 59097-02 B