Q-Logic 5600 manual Customizing Graphs, Default Graph Options Dialog

5 – Managing Ports Graphing Port Performance

S

5.6.7.3

Customizing Graphs

You can customize the graph polling frequency, what is plotted in the graphs, and the graph color scheme. To set the polling frequency for all graphs, open the Graph menu and select Set Polling Frequency.... Enter an interval in seconds (0–60) in the dialog box and click the OK button.

To choose what is to be plotted, open the Graph menu and select Modify Graph Options.... You can also right click on a graph and select Change Graph Options. This opens the Default Graph Options dialog shown in Figure 5-9.

Figure 5-9. Default Graph Options Dialog

To modify the graph options, do the following:

1.Choose the units for the graph:

„Select the Show Bytes Data on Graph check box to plot data in KBytes/second

„Select the Show Frames Data on Graph check box to plot data in frames/second.

5-26 59097-02 B