4 – Managing Switches Managing Switch Stacks
S
Date/time and Network Time Protocol (NTP) settings. Refer to ”Setting the Date/Time and Enabling NTP Client” on page
Firmware load and activation. Refer to ”Installing Firmware” on page
Switch reset. Refer to ”Resetting a Switch” on page
Edit zoning configuration. Refer to ”Configuring the Zoning Database” on page
Editing user accounts. Refer to ”Managing User Accounts” on page
SNMP configuration. Refer to ”SNMP Configuration” on page
Syslog configuration. Refer to ”Syslog” on page
Additional stack operations include:
Refresh the stack to update the faceplate display with current information for all switches in the stack
Select all ports on all switches in the stack
Remove a switch from a stack. Choose this option after a switch no longer has a
4.8.1
Syslog
The Syslog dialog enables you to save the log information for the stack to a remote host that supports the syslog protocol. Use the Syslog dialog to enable remote logging for the stack. Refer to ”Remote Logging” on page
