A
A – Command Line Interface Group Command
Keywords add [group]
Initiates an editing session in which to specify a group member and its attributes for the existing group given by [group]. ISL, Port, and MS member attributes are described in Table
Table A-5. ISL Group Member Attributes
Attribute |
| Description |
|
| |
Member | Worldwide name of the switch that would attach to the switch. A | |
| member cannot belong to more than one group. | |
Authentication | Enables (CHAP) or disables (None) authentication using the Chal- | |
| lenge Handshake Authentication Protocol (CHAP). The default is | |
| None. | |
Primary Hash | The preferred hash function to use to decipher the encrypted Pri- | |
| mary Secret sent by the ISL member. The hash functions are MD5 | |
| or | |
| switch will use the Secondary Hash. | |
Primary Secret | Hexadecimal string that is encrypted by the Primary Hash for | |
| authentication with the ISL group member. The string has the follow- | |
| ing lengths depending on the Primary Hash function: | |
| | MD5 hash: |
| | |
Secondary Hash | Hash function to use to decipher the encrypted Secondary Secret | |
| sent by the ISL group member. Hash values are MD5 or | |
| Secondary Hash is used when the Primary Hash is not available on | |
| the ISL group member. The Primary Hash and the Secondary Hash | |
| cannot be the same. | |
Secondary | Hex string that is encrypted by the Secondary Hash and sent for | |
Secret | authentication. The string has the following lengths depending on | |
| the Secondary Hash function: | |
| | MD5 hash: |
| | |
Binding | Domain ID of the switch to which to bind the ISL group member | |
| worldwide name. This option is available only if | |
| FabricBindingEnabled is set to True using the Set Config Security | |
| command. Refer to the ”Set Config Command” on page | |
| 0 (zero) specifies no binding. | |
|
|
|
