Kyocera SL300R Starting and ending an Auto Play slideshow, From or in Setting Auto Play on p.5-16

5

Using the P Playback Mode Functions

	displayed.			￿￿￿￿￿￿
11 Use U or D on the 4-way button to select a		￿￿￿￿￿￿￿￿￿
setting and then press the OK button E.
		￿￿￿￿￿￿￿￿
OFF:	No effect is set.				￿￿￿￿￿￿￿￿
FADE:	The previous image gradually darkens while the	￿￿￿￿￿￿
	next image gradually brightens until it is fully
OVERLAP: The new image slides over the top of the current
SHUTTER:	image and replace it.
	Black curtains close from the top and bottom of
	the screen to erase the current image, after
	which the black curtains open again towards the
WIPE:	top and bottom to reveal the next image.
	The current image disappears as if wiped away
	from the left and is replaced by the new image.
Starting and ending an AUTO PLAY slideshow
		￿￿￿￿￿￿			￿￿￿
From step 3 or step 11 in “Setting AUTO PLAY”: on p.5-16
				￿￿￿￿￿￿
12 Use U or D on the 4-way button to select		￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿
[START] and then press the OK button E to						￿￿
			￿￿				￿￿￿￿￿￿￿
begin the slideshow.

The table below shows the operations that can be performed during an AUTO PLAY slideshow.

Button		Description
	Movie	Still image with postrecorded message	Still image
U	Increases the volume.	Increases the volume.	Not applicable.
D	Decreases the volume.	Decreases the volume.	Not applicable.
L	Press once to stop the movie and	Hold down to play back the message	Not applicable.
	begin scanning backwards through	at half speed. Release the button to
	the movie frame by frame. After that,	return to normal playback.
	scanning moves one frame back each
	time you press the button.
R	Press once to stop the movie and	Hold down to play back the message	Not applicable.
	begin scanning forwards through the	at double speed. Release the button
	movie frame by frame. After that,	to return to normal playback.
	scanning moves one frame forward
	each time you press the button.

13 To end the slideshow, press the MENU button K.

5-18