Kyocera SL300R manual Selecting the Number of Pixels Image Size, Press the shutter release button

3	Use L or R on the 4-way button to select			￿￿￿￿￿￿￿￿￿
	SELF TIMER [t] and then press the OK
	button E.
4	Press U or D on the 4-way button to select			￿
	the desired delay time and then press the OK
	button E.
	[	]:	Sets a self-timer delay of 10 seconds.
	[	]:	Sets a self-timer delay of 2 seconds.	￿￿￿
	OFF:		Normal photography (default)
5	The [		] or [ ] icon appears on the LCD	￿￿
	monitor to show the selected delay.

•Press the MENU button K to clear the menu icons and make picture taking easier.

6 Press the shutter release button.

The self-timer runs for the selected delay time and then releases the shutter.

•This mode is cancelled after you take the picture. To continue using the self-timer, select self-timer mode again.

•Place the camera on a stable surface.

•To interrupt the self-timer once it has started running, press the shutter release button.

[] Selecting the Number of Pixels (Image Size)

Applicable mode: C/N/M

The number of pixels refers to the number of individual dots used to make up the image. The larger this number, the better the image quality. However, this also increases the size of the image file so that fewer pictures can be taken. Choose the number of pixels that best suit the intended use of the shot. ( p.4-7)

1 Switch the camera on and press O or Q on the mode button until the “C”, “N” or “M” icon lights on the mode select LED.

2 Press the MENU button K to display the menu icons.

4

Using C Camera Mode, N Continuous Shooting Mode and M Movie Mode

4-5