2-18
2
Basic Operations
If the driver software is not installed successfully, the PC will be unable to recognize the
camera. If this occurs, use the procedure below to uninstall the drivers. Then use the
procedure on p.2-12 to re-install the drivers.
* Note that this procedure is only required for Windows 98 and Windows 98SE.
Uninstalling the driver software
(Windows 98 and Windows 98SE only)
1Load the memory card into the camera. ( p.1-3)
2Connect the AC adapter to the camera.
3Connect the camera to your PC using the dedicated USB cable
and then start up the PC.
4Press the POWER button H to switch the camera on.
5Right-click [My Computer] and
select [Properties].
6When the System Properties
window opens, click the [Device
Manager] tab.
Finecam_E.book Page 18 Thursday, August 28, 2003 6:21 PM