Kyocera SL300R manual Then press the OK, Metering Selecting the Area Used for Setting the Exposure

5 Press U or D on the 4-way button to select the desired ISO setting and then press the OK button E.

[No icon] AUTO:	The camera sets the ISO sensitivity to suit
[ISO100] 100:	the ambient conditions. (default)
	Fixed at ISO 100
[ISO200] 200:	Fixed at ISO 200
[ISO400] 400:	Fixed at ISO 400
[ISO800] 800:	Fixed at ISO 800

6 Press the MENU button K to clear the menu.

7 The selected setting ([ISO200], etc.) appears on the LCD monitor.

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

4

•Because this setting is retained even when the camera is switched off, you need to restore the original setting or otherwise modify the setting to suit the scene or subject being shot.

[METERING] Selecting the Area Used for Setting the Exposure

Applicable mode: C/N

This setting allows you to select the area that the camera uses when setting the exposure. The available settings are [EVALUATION], [CENTER] and [SPOT AREA]. Use the setting that best suits your subject.

1 Switch the camera on and press O or Q on the mode button until the “C” or “N” icon lights on the mode select LED.

2 Press the MENU button K to display the menu icons.

3 Use L or R on the 4-way button to select

SET DETAILS [	] and then press the OK
button E.		￿￿￿￿￿￿￿￿￿￿

Using C Camera Mode, N Continuous Shooting Mode and M Movie Mode

4-23