Kyocera SL300R - page 21

1-5
1
Camera Preparations
• When the card access LED is flashing, images are being recorded onto the memory card.
Do not open the card/battery cover or remove the memory card while the LED is flashing
as this could cause data corruption or, in some cases, camera damage.
• Check that a memory card is loaded in the camera before switching the camera on.
• While the camera is switched on, pressing the POWER button H switches the camera off.
2Push the memory card in gently
with your fingertip.
If you push the memory card in slightly, it pops
back out and you can then pull it out completely.
3Close the card/battery cover.
Close the cover and slide it in the opposite
direction to the arrow (U) to lock it.
Switching the Camera On
Press the POWER button H.
The startup screen is displayed for a few seconds and
then the normal shooting mode screen appears.
Finecam_E.book Page 5 Thursday, August 28, 2003 6:21 PM