Module Configuration Menu Screen
6H128-08 and 6H129-08 User’s Guide 5-39
To access the Module Configuration Menu screen from the Module Menu
screen, use the arrow keys to highlight the MODULE
CONFIGURATION menu item and press ENTER. The Module
Configuration screen displays.
Figure 5-17 Module Configuration Menu Screen
The following briefly explains each screen accessible from the Module
Configuration Menu screen:
GENERAL CONFIGURATION
The General Configuration screen allows the user to monitor and
configure operating parameters for the 6H12X-08. For details, refer to
Section 5.15.
SNMP COMMUNITY NAMES
The SNMP Community Names screen allows the user to enter, change, or
review the community names used as access passwords for Local/Remote
Management operation. Access is limited based on the password level of
the user. For details, refer to Section 5.16.
Firmware Revision: XX.XX.XX
Module Configuration Menu
GENERAL CONFIGURATION
SNMP COMMUNITY NAMES
SNMP TRAPS
SWITCH CONFIGURATION
ETHERNET INTERFACE CONFIGURATION
SMARTTRUNK CONFIGURATION
MODULE SPECIFIC CONFIGURATION
2159-15
BOOTPROM Revision: XX.XX.XX
Module Type: 6H128-08
Slot Number:
X
6H128-08 LOCAL MANAGEMENT
RETURN
EXIT