Cabletron Systems 6H128-08, 6H129-08 The following denitions briey explain each eld of the Port Redirect Function screen:, Allows a selected port [n] to be changed to a destination port., Shows which ports are currently set as source ports., Shows which ports are currently set as destination ports., Allows a selected port [n] to be changed to a source port.

Chapter 5: Local Management
5-80 6H128-08 and 6H129-08 User’s Guide
Figure 5-29 Port Redirect Function Screen
The following definitions briefly explain each field of the Port Redirect
Function screen:
Source Port (Read-only)
Shows which ports are currently set as source ports.
Destination Port (Read-only)
Shows which ports are currently set as destination ports.
Remap Errors (Read-only)
Displays whether the corresponding source ports are configured to send
errored frames to the destination ports, or to drop all errored frames
before forwarding traffic.
Source Port [ n ] (Selectable)
Allows a selected port [n] to be changed to a source port.
Destination Port [ n ] (Selectable)
Allows a selected port [n] to be changed to a destination port.
Firmware Revision: XX.XX.XX
Port Redirect Function
2269_22
BOOTPROM Revision: XX.XX.XX
Source Port
----------------
1
1
1
2
2
3
3
3
Destination Port
---------------------
2
3
4
1
3
4
2
1
Module Type: 6H128-08
Slot Number:
X
Remap Errors
-------------------
ON
OFF
ON
OFF
ON
OFF
ON
OFF
6H128-08 LOCAL MANAGEMENT
Event Message Line
SAVE PREVIOUS
RETURN
RETURN
NEXT
Source Port [ 5] Destination Port [ 1] Status [ADD]
EXIT
Errors [ ON]