Chapter 5: Local Management
5-48 6H128-08 and 6H129-08 User’s Guide
5.15.5 Setting the Module Date
The modules are year 2000 compliant, so the module date may be set
beyond the year 1999. To set the module date, perform the following
steps:
1. Use the arrow keys to highlight the Module Date field.
2. Enter the date in this format: MM/DD/YYYY
3. Press ENTER to set the module date to the date in the input field.
4. Use the arrow keys to highlight the SAVE command at the bottom of
the screen and press ENTER.
If the date entered is a valid format, the Event Message Line at the top of
the screen displays “SAVED OK”. If the entry is not valid, Local
Management does not alter the current value, but it does refresh the
Module Date field with the previous value.
5.15.6 Setting the Module Time
To set the module time, perform the following steps:
1. Use the arrow keys to highlight the Module Time field.
2. Enter the time in a 24-hour format: HH:MM:SS
NOTE If the 6C105 chassis has been assigned a chassis date, it is not
necessary to assign a module date to the 6H12X-08. All
installed modules recognize the chassis date of the 6C105.
NOTE It is not necessary to add separators between month, day, and
year numbers. For example, to set the date to 03/17/1997, type
“03171997” in the Module Date field.
NOTE If the 6C105 chassis has been assigned a chassis time, it is not
necessary to assign a module time to the 6H12X-08. All
installed modules recognize the chassis time of the 6C105.