HP 625n Gigabit Ethernet Print Server manual Telnet Commands and Parameters 14

Table 3.4 Telnet Commands and Parameters (14 of 18)

ipx-frametype	Specifies the IPX frame type settings available for your print
	server model: AUTO (default), EN_SNAP, EN_8022,
	EN_8023, EN_II. For more information, see Chapter 9.
ipx-sapinterval	Specifies the time interval (1 to 3600 seconds) that the
	HP Jetdirect print server waits between Service Advertising
	Protocol (SAP) broadcasts on the network. The default is
	60 seconds. 0 disables SAP broadcasts.
ipx-mode	(Read-only parameter) Specifies the NetWare mode
	configured on the print server, either RPRINTER or
	QSERVER mode.
ipx-nds-tree	An alphanumeric string, up to 31 characters, that specifies
	the NDS tree name for the print server.
ipx-nds-context	An alphanumeric string, up to 256 characters, that specifies
	the NDS context for the HP Jetdirect print server.
ipx-job-poll	Specifies the time interval (1 to 255 seconds) that the
	HP Jetdirect print server will wait to check for print jobs in
	a print queue. The default is 2 seconds.
pjl-banner	Enables or disables printing an IPX banner page through
ipx-banner	Printer Job Language (PJL). 0 disables banner pages. 1
	(default) enables banner pages.
pjl-eoj	Enables or disables IPX end-of-job notification through PJL.
ipx-eoj	0 disables, 1 (default) enables.
pjl-toner-low	Enables or disables IPX toner-low notification through PJL.
ipx-toner-low	0 disables, 1 (default) enables.
AppleTalk
Command	Description
appletalk	Enables or disables AppleTalk (EtherTalk) protocol
	operation on the print server. 0 disables, 1 (default) enables.
	For example,
	appletalk 0 will disable AppleTalk operation
name-override	(External print servers only) Specifies the name of the
	AppleTalk network. Up to 32 characters may be used.
Name	(Read-only parameter) The name of the printer on the
	AppleTalk network. A number after the name indicates that
	there are multiple devices with this name, and this is the Nth
	instance of the name.
Print Type	(Read-only parameter) Specifies the AppleTalk network
	printer type reported by the Jetdirect print server. Up to three
	print types may be reported.
Zone	(Read-only parameter) The name of the AppleTalk network
	zone on which the printer is located.
Phase	(Read-only parameter) AppleTalk phase 2 (P2) is
	preconfigured on the HP Jetdirect print server.

ENWW TCP/IP Configuration 92