Table 4.1 | HP Jetdirect Home Page Items (2 of 2) | |
|
|
|
Item |
| Description |
|
|
|
Host Name |
| Specifies the IP host name assigned to the device and |
|
| stored on the HP Jetdirect print server. See TCP/IP on the |
|
| Networking Tab. |
|
| |
System Up Time | The length of time since either the HP Jetdirect print server | |
|
| or the network device was last powered off/on. |
|
| |
System Contact | A text string (stored on the HP Jetdirect print server) for the | |
|
| name of a person to contact for this device. See TCP/IP on |
|
| the Networking Tab. |
|
| |
System Location | A text string (stored on the HP Jetdirect print server) that | |
|
| identifies the physical location of this device. See the |
|
| Networking TCP/IP configuration pages. |
|
|
|
HP Jetdirect |
| The product number of the HP Jetdirect print server (for |
|
| example HP J7934A). |
|
| |
Firmware Version | The version of the operating instructions installed on the | |
|
| HP Jetdirect print server. |
|
|
|
IP Address |
| The Internet Protocol address configured on the |
|
| HP Jetdirect print server. For general information on IP |
|
| addresses, see Appendix A. |
|
| |
Hardware Address | The LAN hardware (or MAC, Media Access Control) | |
|
| address of the HP Jetdirect print server. This unique |
|
| address is assigned by |
|
| administered. |
|
|
|
LAA |
| A Locally Administered Address (LAA) that replaces the |
|
| LAN Hardware (MAC) address. The LAA may be |
|
| configured under local control by a network administrator. |
|
| By default, the LAA is the |
|
| address. |
|
| |
Admin Password | Specifies whether or not an administrator password has | |
|
| been set. This password may also be configured through |
|
| a Telnet session with the HP Jetdirect print server, or from |
|
| HP Web Jetadmin. |
|
| (EIO print servers only) Because passwords are |
|
| synchronized with selected printers, the password may |
|
| have also been set through printer security Web pages. |
|
| Use the Admin Password page to set or clear |
|
| administrator passwords. |
|
| If an administrator password has been set, you will be |
|
| prompted for a User Name and Password to access |
|
| network parameters. For more information, click Help, or |
|
| see the Admin. Account section in this guide. |
|
|
|
ENWW | Using the Embedded Web Server 108 |