Although not recommended, you may choose to accept both HTTPS and HTTP communications that are not secure by disabling (clearing) the Encrypt All Web Communication checkbox.
To support the use of HTTPS communications, a Jetdirect certificate must be installed. A
The minimum encryption strength that will be allowed must be specified when using a Jetdirect certificate. You may select Low (default), Medium, or High encryption strength. For example, selecting Low will allow medium or high encryption levels to be used whereas selecting High will only allow high encryption levels.
For each encryption strength, ciphers are specified to identify the weakest cipher allowed. Early browsers may only support
Note | Cipher suites support different levels of encryption |
| strength. The cipher suites currently supported for |
| encryption and decryption are DES (Data |
| Encryption Standard, |
| |
|
|
SNMP
Use this tab to enable or disable SNMP v1, v2c and v3 agents on the print server, depending on the print server model.
SNMP v3.
The SNMP v3 agent is enabled when an initial SNMP v3 account on the print server is created. Once the account is created, any SNMP management application, if properly configured, can access or disable the account.
ENWW | Using the Embedded Web Server 147 |