AppleTalk Protocol Information
Information in this section of the Jetdirect configuration page (Ethernet Only) is described in Table 9.9. For error messages, see Table 9.11.
Table 9.9 | AppleTalk Configuration Information | |
|
|
|
Message |
| Description |
|
|
|
STATUS: |
| Indicates the current AppleTalk configuration status. |
|
| READY: Indicates the HP Jetdirect print server is awaiting |
|
| data. |
|
| DISABLED: Indicates that AppleTalk was manually |
|
| disabled. |
|
| INITIALIZING: Indicates that the print server is registering |
|
| the node address or name. An additional status message |
|
| may also be displayed. |
|
| An error code and message is displayed if the print server |
|
| is not ready. For more information, see Table 9.11. |
|
|
|
NAME: |
| The name of the printer on the AppleTalk network. A |
|
| number after the name indicates that there are multiple |
|
| devices with this name, and this is the Nth instance of the |
|
| name. |
|
|
|
ZONE: |
| The name of the AppleTalk network zone on which the |
|
| printer is located. |
|
|
|
TYPE: |
| The type of the printer being advertised on the network. |
|
| Two types can be displayed. |
|
|
|
NETWORK |
| NETWORK NUMBER: Identifies the AppleTalk Network |
NUMBER: |
| Number on which the HP Jetdirect print server is currently |
|
| operating. |
NODE NUMBER: | NODE NUMBER: Identifies the AppleTalk Node Number | |
|
| that the print server chose for itself as part of its |
|
| initialization sequence. |
|
| Note: The AppleTalk phase 2 (P2) parameter is |
|
| preconfigured on the HP Jetdirect print server. |
|
|
|
ENWW | HP Jetdirect Configuration Page 223 |
