HP 625n Gigabit Ethernet Print Server manual Ending the FTP Session, Commands

Ending the FTP Session

To end an FTP session, type quit or bye.

Note	Prior to ending an FTP session, a Ctrl C command
	is recommended to ensure the data connection is
	closed.

Commands

Table 6.1 summarizes commands available to the user during an FTP printing session.

Table 6.1 User Commands for HP Jetdirect FTP Server (1 of 2)

Command	Description
user <username>	<username> specifies a user. Any user will be accepted
	and can print to the selected port.
cd <port#>	<port#> selects a port number for printing. For
	supported HP Jetdirect print servers, only port1 is
	available.
cd /	/ specifies the root directory of the HP Jetdirect
	FTP server.
quit	quit or bye terminates the FTP session with the
	HP Jetdirect print server.
bye
dir	dir or ls displays the contents of the current directory.
	If this command is typed in the root directory, a list of
ls
	available ports for printing is displayed. For supported
	HP Jetdirect print servers, only port1 is available.
pwd	Displays the current directory or the current Jetdirect
	printing port.
put <filename>	<filename> specifies the file to send to the selected
	HP Jetdirect print server port (Port 1).
bin	Configures an FTP binary (image) file transfer.
ascii	Configures an FTP ASCII file transfer. HP Jetdirect print
	servers support only non-print format control for character
	transfers (standard values for spacing and margins are
	used).

ENWW FTP Printing 176