Table 7.1 Summary of HP Jetdirect Security Features (2 of 3)
IP Access Control List
●Specifies up to 10 host systems, or networks of host systems, that are allowed access to the HP Jetdirect print server and the attached network device.
●Access is generally limited to host systems specified in the list.
●By factory default, host systems that use HTTP (for example, using the embedded Web server or IPP) are not checked against entries in the Access List and are allowed access. However, HTTP host access can be disabled through the embedded Web server.
●If the list is empty, then all hosts are allowed access.
●Configured on the HP Jetdirect print server using TFTP (Chapter 3), Telnet (Chapter 3), embedded Web server (Chapter 4), or management software.
Telnet Control
●Telnet may be disabled through the embedded Web server (see Chapter 4). Telnet access is not secure.
Authentication and Encryption
●
●
SNMP v1/v2c Set Community Name (IP/IPX)
(SNMP v1/v2c only)
●A password on the HP Jetdirect print server that allows incoming SNMP Set commands (for example, from management software) to write (or set)
HP Jetdirect configuration parameters.
●For a
●On IP networks, authentication of SNMP Set commands may be further restricted to systems identified on the access control list.
●Configured on the HP Jetdirect print server using TFTP (Chapter 3), Telnet (Chapter 3), embedded Web server (Chapter 4), or Management application services.
●SNMP v1/v2c uses plain text and can be disabled.
ENWW | Security Features 181 |
