Table 4.4 | TCP/IP Settings (3 of 3) | |
Item |
| Description |
|
|
|
TTL/SLP |
| Specifies the IP multicast Time To Live (TTL) discovery setting |
|
| for Service Location Protocol (SLP) packets. The default value is |
|
| 4 hops (the number of routers from the local network). The range |
|
| is |
|
| For print servers configured for Auto IP |
|
| field will be ignored. TTL on outbound packets will always be set |
|
| to 255 and limited to the |
|
| |
System Contact | Identifies a person who is assigned to administer or service this | |
|
| device. This field may include a phone number or similar |
|
| information. |
|
| When configured, this parameter will be displayed on the |
|
| HP Jetdirect home page. |
|
| |
System Location | Specifies the physical location of the device or related | |
|
| information. Only printable ASCII characters are allowed, up to 64 |
|
| characters. |
|
| When configured, this parameter will be displayed on the |
|
| HP Jetdirect home page. |
|
|
|
Banner Page |
| Specifies whether to enable or disable printing of an LPD banner |
|
| page for print jobs. For currently supported print servers, only a |
|
| single port is available (Port 1). |
|
|
|
Default IP |
| Specifies the IP address to use when the print server is unable |
|
| to obtain an IP address from the network during a forced TCP/IP |
|
| reconfiguration (for example, when manually configured to use |
|
| BOOTP/DHCP). |
|
| LEGACY DEFAULT_IP: sets the legacy default IP address |
|
| 192.0.0.192. |
|
| AUTO_IP: sets a |
|
| The initial setting is determined by the IP address obtained when |
|
| first powered on. |
|
|
|
Send DHCP |
| A checkbox is used to specify whether DHCP requests will be |
requests |
| periodically transmitted when a legacy default IP address |
|
| 192.0.0.192 or |
|
| automatically assigned. |
|
| Clear the checkbox to disable DHCP requests. |
|
| Check the checkbox (default) to enable DHCP requests. |
|
|
|
ENWW | Using the Embedded Web Server 117 |
