Table 4.12 Certificate Configuration Screens (3 of 4)
Certificate Information
Use this page to enter information for requesting a certificate from a Certificate Authority.
Common Name. (Required)
For HP Jetdirect print servers, specify the fully qualified domain name or a valid IP address for the device.
Examples:
●Domain Name: myprinter.mydepartment.mycompany.com
●IP address: 192.168.2.116
The Common Name will be used to uniquely identify the device. For HP Jetdirect print servers using EAP authentication, some authentication servers may need to be configured with the Common Name as specified on the certificate.
If the default IP address 192.0.0.192 is configured on the Jetdirect print server, it will not likely be valid for your network. You should not use this default address to identify your device.
Organization. (Required) Specify the full legal name for your company.
Organizational Unit. (Optional) Specify your department, division, or other subgroup of your organization.
City/Locality. (Required) Enter the city or locality in which your organization is located.
State/Province. (Required for all countries/regions) Must contain at least three characters. (required)
Country/Region.
Install Certificate, or Install CA Certificate
Use the Install Certificate screen to install a Jetdirect certificate.
Use the Install CA Certificate screen to install a trusted Certificate Authority (CA) certificate for use during EAP authentication.
Install a PEM/Base64 (Privacy Enhanced Mail) encoded certificate.
To install a certificate, specify the name and path of the file that contains the certificate. Or, click Browse to browse your system for the file.
Click Finish to complete the installation.
To install a certificate, it must be associated with a pending certificate request by the embedded Web server. The Install Certificate option will not be presented if there is no pending request.
A Jetdirect or CA certificate size is limited to 3 KBytes.
ENWW | Using the Embedded Web Server 143 |
