HP 625n Gigabit Ethernet Print Server manual Table B.1 HP Jetdirect Classic Control Panel Menu 2

Table B.1 HP Jetdirect Classic Control Panel Menu (2 of 3)

Menu Item	Description
CFG TCP/IP=	Selects whether you want to access the TCP/IP menu and set
	TCP/IP protocol parameters.
	NO (default): Bypass the TCP/IP menu items.
	YES: Access the TCP/IP menu items.
	● BOOTP=YES* enables configuration by a BootP Server.
	● DHCP=YES* enables configuration by a DHCP Server.
	If DHCP=YES* and the print server has a DHCP lease, you
	can choose to configure the following DHCP settings:
	■ RELEASE: Choose YES to release, or NO to save, the
		current DHCP lease.
	■ RENEW: Choose YES to renew the current DHCP lease,
		or NO to not renew the DHCP lease.
	● AUTO IP=YES* will automatically assign a link-local address
	in the form 169.254.x.x.
	If you specify BOOTP=NO*, DHCP=NO* and AUTO IP=NO*, you
	can manually set the following TCP/IP parameters from the
	control panel:
	■ Each byte of the IP address (IP)
	■	Subnet Mask (SM)
	■	Syslog Server (LG)
	■	Default Gateway (GW)
	■ Idle Timeout period (default is 270 seconds, 0 disables the
		timeout)
	● CFG DNS 1=YES* will allow you to specify the IP address of
	a primary DNS server, one byte at a time.
	● CFG DNS 2=YES* will allow you to specify the IP address of
	a secondary DNS server, one byte at a time.
	Print a Jetdirect configuration page to verify your settings.
	However, note that the print server may overwrite selected
	parameters with values that ensure proper operation.
CFG IPX/SPX=	Selects whether you want to access the IPX/SPX menu and set
	IPX/SPX protocol parameters.
	NO (default): Bypass the IPX/SPX menu items.
	YES: Access the IPX/SPX menu items.
	In the IPX/SPX menu, you can specify the Frame Type parameter
	used on your network.
	■ AUTO (default) will automatically set and limit the frame
		type to the first one detected.
	■ For Ethernet cards, frame type selections include
		EN_8023, EN_II, EN_8022, EN_SNAP.

ENWW The HP Jetdirect EIO Control Panel Menu 247