Table B.2 HP Jetdirect Graphical Control Panel Menu (2 of 4)
Menu Item | Options | Description of settings |
|
|
|
| DHCP RELEASE | This menu appears if CONFIG METHOD was |
|
| set to DHCP and a DHCP lease for the print |
|
| server exists. |
|
| ● NO (default): The current DHCP lease is |
|
| saved. |
|
| ● YES: The current DHCP lease along with |
|
| the leased IP address are released. |
|
|
|
| DHCP RENEW | This menu appears if CONFIG METHOD was |
|
| set to DHCP and a DHCP lease for the print |
|
| server exists. |
|
| ● NO (default): The print server does not |
|
| request to renew the DHCP lease. |
|
| ● YES: The print server requests to renew |
|
| the current DHCP lease. |
|
|
|
| MANUAL SETTINGS | (Available only if CONFIG METHOD is set to |
|
| MANUAL) Configure parameters directly |
|
| from the printer control panel: |
|
| ● IP ADDRESS n.n.n.n: The unique IP |
|
| address of the printer, where n is a value |
|
| from 0 to 255. |
|
| ● SUBNET MASK m.m.m.m: The subnet |
|
| mask for the printer, where m is a value |
|
| from 0 to 255. |
|
| ● SYSLOG SERVER n.n.n.n: The IP |
|
| address of the syslog server used to |
|
| receive and log syslog messages. |
|
| ● DEFAULT GATEWAY n.n.n.n: The IP |
|
| address of the gateway or router used for |
|
| communications with other networks. |
|
| ● IDLE TIMEOUT: The time period, in |
|
| seconds, after which an idle TCP print |
|
| data connection is closed (default is 270 |
|
| seconds, 0 disables the timeout). |
|
|
|
| DEFAULT IP | Specify the IP address to default to when the |
|
| print server is unable to obtain an IP address |
|
| from the network during a forced TCP/IP |
|
| reconfiguration (for example, when manually |
|
| configured to use BootP or DHCP). |
|
| ● AUTO IP: A |
|
| 169.254.x.x will be set. |
|
| ● LEGACY: The address 192.0.0.192 will |
|
| be set, consistent with older Jetdirect |
|
| products. |
|
|
|
|
|
|
ENWW | The HP Jetdirect EIO Control Panel Menu 250 |
