Psion Teklogix 8100107B user manual UPC a Settings, UPC E Settings, Transmit Number System

Chapter 6: Settings

Decoded (HHP)

6.25.2.8 UPC A Settings

Enabled

Set this parameter to on to enable “UPC A” bar code scanning recognition.

Check Digit

If you enable this parameter, a check digit is included with the decoded bar code data.

Transmit Number System

If this parameter is enabled, the number system digit is transmitted with the decoded bar code data.

Addendum Add-on 2 And Addendum Add-on 5

An addendum is a separate bar code, supplementary to the main bar code. Enabling these parameters defines the length of the addendum bar code to either 2 or 5 characters.

Addendum Required

When this parameter is set to on, the scanner does not accept the main bar code without an addendum.

Addendum Separator

“Addendum Separator” is a space that is added between the UPC A bar code and the Add-on code/Addenda. When this parameter is set to on, the scanner does not accept the main bar code without an addendum.

Prefix/Suffix

Refer to page 149 for details.

6.25.2.9 UPC E Settings

Enabled

Set this parameter to on to enable “UPC E”.

Enabled UPC-E1

Set this parameter to on to allow “UPC-E1” (zero suppressed) bar code scans.

164WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.0 User Manual