Chapter 2: Basic Checkout

Preparing The WORKABOUT PRO For Operation

2.1 Preparing The WORKABOUT PRO For Operation

2.1.1 The Main Battery

Warning:

It is critical that you review the battery safety guidelines in “Lith-

 

ium Ion Battery Safety Precautions” on page XVIII before charg-

 

ing the battery.

The WORKABOUT PRO C can be powered with one of the following batteries:

Standard Battery

High-Capacity Battery, or

3 AA alkaline batteries.

The WORKABOUT PRO S can be powered with one of the following battery packs:

Standard Battery, or

High-Capacity Battery

2.1.1.1Charging The Main Battery

Important: Before opening the battery cover to replace a battery, it is critical that you read “Removing And Installing The Battery Pack” on page 34 and “Safely Swapping The Main Battery” on page 27 for details about safely swapping the battery.

Battery packs shipped from the factory are charged to approximately 40% and must be fully charged prior to use. Batteries can be charged using a variety of chargers and docking stations along with a WORKABOUT PRO internal charger. When using the internal charger, a suitable power source is required. All chargers and docking stations are described in Chapter 9: Peripheral Devices & Accessories beginning on page 297.

Note: If you are powering up a new unit, a warning message may appear on the screen indicating that the backup battery capacity is low. To recharge the internal battery, you must fully charge the WORKABOUT PRO with the main battery installed in the unit. An overnight charge is recommended.

Important: Before opening the battery cover on your WORKABOUT PRO, you must turn off the hand-held. If the battery cover is opened while the hand-held is still powered on, the unit may reboot.

WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.0 User Manual

15

Page 51
Image 51
Psion Teklogix 8100107B user manual Preparing The Workabout PRO For Operation, Charging The Main Battery