Chapter 6: Settings

Flight Mode – Disabling Wireless Components

Tap on Start>Settings>Connections>Wireless Power icon.

6.31.1 Flight Mode – Disabling Wireless Components

To disable all wireless components when, for example, you are taking your hand- held onto a plane where wireless connections need to be shut down:

Tap on the Disable All button. To enable wireless components:

Tap on Enable All.

To disable a particular radio connection rather than all connections:

Highlight an Available (enabled) radio listed in this dialog box, and then tap on the Disable button.

6.31.2 Setting Up A Network Card

Network (802.11) cards are used to connect to a network so that you can browse the Internet, download e-mail and so on. You can connect to an existing network or you can set up a new connection on your WORKABOUT PRO.

Note: For detailed information about setting up a new network, refer to Chapter 5,“Connecting To A LAN With 802.11”.

Keep in mind that the WORKABOUT PRO is equipped with context sensitive Help Files. If you find that you’re unsure how to proceed with a network connection at any point during setup, tap on the question mark icon in the navigation bar at the top of the screen.

232WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.0 User Manual

Page 268
Image 268
Psion Teklogix 8100107B user manual Setting Up a Network Card, Flight Mode Disabling Wireless Components, Tap on Enable All