Psion Teklogix 8100107B Charging a Spare Battery, Spare Battery Charge Well DC in Socket

Chapter 9: Peripheral Devices & Accessories

Charging A Battery Installed In The WORKABOUT PRO

The desktop docking station is designed to charge the battery installed in the WORKABOUT PRO along with a spare battery pack.

Spare Battery

Charge Well

DC IN Socket

Figure 9.6 Back Of Desktop Docking Station

Important: This docking station can only be used to charge Psion Teklogix approved Lithium-Ion batteries–specifically model numbers

WA3000-G1 and WA3006.

9.4.1 Charging A Battery Installed In The WORKABOUT PRO

•Insert the DC power cable to the DC IN socket on the desktop docking station. Plug the pronged end of the cable into an AC outlet.

•Slide the hand-held into the docking station, making certain that the LIF

(Low Insertion Force) port on base of the WORKABOUT is securely seated on the docking station connector pins. An icon is displayed briefly in the navigation bar at the top of the hand-held screen indicating that the unit is properly installed in the station– . This icon is only displayed when the unit is switched on.

The LED on the WORKABOUT PRO lights up indicating that the unit has external power and battery charging will begin. It is safe to leave the unit in the desktop docking station while it is not in use–the battery will not be overcharged.

9.4.2 Charging A Spare Battery

•Insert the battery in the spare battery charge well at the back of the docking station, aligning the contacts on the battery with the contacts in the spare battery charge well.

308WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.0 User Manual