Big Blue Go™
WIRELESS BLUETOOTH® SPEAKER
LI-ION BATTERY WARNINGS
This device contains a
or disposal.
FCC INFORMATION
This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the distance between the equipment and receiver.
•Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1.This equipment may not cause harmful interference.
2.This equipment must accept any interference received, including interference that may cause undesired operation.
Modifications not authorized by the manufacturer may void the user’s authority to operate this device. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be
RSS INFORMATION
This device complies with
Cet appareil est conforme à la norme
(1)l'appareil ne doit pas produire de brouillage, et
(2)l'utilisateur de l'appareil
doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
The device meets the exemption from the routine evaluation limits in section
2.5of RSS 102 and compliance with
Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de RSS 102 et la conformité à l'exposition
de
This Class B digital apparatus complies with Canadian
LOCATION OF PARTS
AND CONTROLS
1.Charging LED Indicator (behind speaker grill)
2.LED Ring
3.Pairing/Play/Pause Button
4.Micro USB Charging Port
5.Power/Battery Level Switch
6.Volume Up Button
7.Volume Down Button
8.Call Answer/Track Forward Button
9.Call End or Ignore/Track Back Button
10.Vehicle Suction Mount
11.12V/24V Car Adapter
12.AC/DC Adapter
13.USB to Micro USB Charging Cable
LOCATION OF PARTS
AND CONTROLS
1
2
3
45
6 | 7 | 8 | 9 |
12
10
11 13
CHARGING THE SPEAKER
1.Insert the included USB cable's MICRO USB connection into the
MICRO USB CHARGING PORT on the speaker.
2.The speaker can be charged several ways:
•Plug the USB cable's USB connection into the included AC/DC power adapter. Plug the AC/DC power adapter into an electrical wall outlet.
•Plug the USB cable's USB connection into the included 12V/24V CAR ADAPTER and plug the 12V/24V CAR ADAPTER into your vehicle's DC socket.
•Plug the USB cable's USB connection into your computer’s USB port.
3.The CHARGING LED INDICATOR is RED while the speaker is charging. When the speaker is fully charged, the CHARGING LED INDICATOR is GREEN. For first time use, charge the speaker for at least 3 hours.
4.When speaker's battery is low, the CHARGING LED INDICATOR will flash RED.
BLUETOOTH® DEVICES
The speaker pairs with devices that use the Bluetooth® Hands Free Profile (HFP) and/or the Advanced Audio Distribution Profile (A2DP). HFP enables
a Bluetooth® connection. When you pair devices to the speaker, the devices operate according to their protocols. For example, when you pair a smartphone to the speaker, it handles calls and plays music since it has both the HFP and A2DP protocols. MP3 players with Bluetooth® and A2DP only play music and cell phones (not smartphones) only handle calls.
PAIRING YOUR DEVICE
1.Prepare your device to pair using Bluetooth® wireless technology, making sure you are within 33 feet of the speaker. Refer to your device’s owner's manual for details if necessary.
2.Slide the POWER SWITCH to • to turn the speaker on. A tone will sound and the LED RING will illuminate solid blue for 5 seconds.
Note: When the LED RING is off and any button is pressed, the LED RING
Merrimack, New Hampshire, USA 03054
840066