Chapter 6: Settings

Advanced Information

When the WORKABOUT PRO network connection is severed, the Status field displays Ready to Connect.

A unit equipped with a GSM/GPRS expansion board displays the signal strength in the main Wireless WAN screen, even while a connection is active. Units equipped with certain other modems (e.g. Sierra Wireless UMTS and CDMA modems, Novatel UMTS modems) do not display the signal strength while a connection is active.The Rx bytes and Tx bytes fields estimate the amount of data transmitted and received, respectively.

6.33.3.1 Shutting Down The Wireless WAN User Interface

While it is not usual to shut down the GSM/GPRS user interface, you can accomplish this by tapping on the File menu and choosing the Exit command in the Wireless WAN screen.

Note: Once you’ve shut down the user interface, you can only enable the radio by tapping on the Wireless WAN icon to display the dialog box.

6.33.4 Advanced Information

In most cases, when a GSM/GPRS radio and SIM are installed in your hand-held, setup is automatic. Follow the steps outlined under the heading “Establishing A Connection” on page 240 to make a connection. The information in this section is for advanced setup purposes.

6.33.4.1 Entering A PIN

If a PIN is required, a PIN entry dialog box is displayed.

Type your PIN, and press [ENTER].

Note: If you exceed the number of allowable attempts, a PUK entry window is brought to the foreground. You’ll need to enter a new PIN number.

242WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.0 User Manual

Page 278
Image 278
Psion Teklogix 8100107B user manual Advanced Information, Shutting Down The Wireless WAN User Interface, Entering a PIN