Psion Teklogix 8100107B 25.1.7 EAN, Enable GS1-128/GS1 US, Enable Isbt, Field Size/Char

Chapter 6: Settings

Decoded (Internal) Scanners

6.25.1.6 Code 128

Enabled

Set this parameter to on to enable “Code 128”.

Enable GS1-128/GS1 US

Previously UPC/EAN and UCC, these types of bar codes include group separators and start codes.

Enable ISBT 128

To successfully scan this variation, “Enable ISBT 128” must be set to on.

Decode Performance

If this parameter is set to on, one of three decode levels assigned to the “Decode Performance Level” parameter can be selected.

Decode Perf. Level

This parameter provides three levels of decode performance or “aggressiveness” for Code 128 symbols. Increasing the performance level reduces the amount of required bar code orientation – this is useful when scanning very long and/or truncated bar codes. Keep in mind that increased levels reduce decode security.

When you double-tap on this parameter, a dialog box is displayed in which you can enter a decode performance level of between 1 and 3.

Field Size/Char

Refer to page 148 for details.

6.25.1.7 EAN 13

Enabled

Set this parameter to on to enable “EAN 13”.

Prefix/Suffix

Prefix Char

This character, if non-zero, is added before a successfully decoded bar code. Press the key you want to insert in the dialog box attached to this parameter. The ASCII/Unicode key value of the keypress is displayed.

WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.0 User Manual 149