Psion Teklogix 8100107B 25.3.9 UPC/EAN Shared Settings, Enable UPC-E1, Convert To UPC-A

Chapter 6: Settings

Decoded (Intermec ISCP)

Convert To EAN 13

If this parameter is enabled, a UPC A bar code is converted to EAN 13.

Prefix/Suffix

Refer to page 149 for details.

6.25.3.8 UPC E Settings

Enabled

Set this parameter to on to enable “UPC E”.

Enable UPC-E1

Set this parameter to on to allow “UPC-E1” (zero suppressed) bar code scans.

Transmit Check Digit

If the check digit is to be transmitted with the data, this parameter must be enabled.

Transmit Number System

If this parameter is enabled, the number system digit is transmitted with the decoded bar code data.

Convert To UPC-A

This parameter converts UPC E (zero suppressed) decoded data to UPC A format before transmission. After conversion, data follows UPC A format and is affected by UPC A programming selections (e.g. Check Digit).

Prefix/Suffix

Refer to page 149 for details.

6.25.3.9 UPC/EAN Shared Settings

The setting assigned to the “Addendum” parameter associated with this option is shared across all UPC and EAN bar codes.

186WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.0 User Manual