Psion Teklogix 8100107B user manual Installation-Chargers And Docking Stations

Chapter 9: Peripheral Devices & Accessories

The Batteries

9.2 The Batteries

Note: Review “Specifications” on page 327 for detailed information.

The WORKABOUT PRO will operate with a Standard Lithium Ion battery pack, a High-Capacity Lithium Ion battery pack or three AA alkaline batteries. If you are using a Lithium Ion battery pack, it must first be charged.

In addition to the main battery, the hand-held is equipped with a rechargable coin battery–a Maxell ML2032.

9.3 Chargers And Docking Stations

Important: Keep in mind when ordering a charger or docking station, you must also order the appropriate power cord separately.

Psion Teklogix offers a variety of chargers and docking stations for the

WORKABOUT PRO. These include:

•Single Battery Charger–Model No. WA3001-G1

•Quad Battery Charger–Model No. WA3004-G1

•Desktop Docking Station–Model No. WA4002-G1 for the WORKABOUT PRO C, and Model No. WA4102-G1 for the WORKABOUT PRO S

•Quad Docking Station–Model No. WA4004-G1

9.3.1 Installation–Chargers And Docking Stations

When installing a charger or docking station, consider the following guidelines.

•Keep chargers and docking stations away from excessive dirt, dust and contaminants.

•Chargers will not charge batteries outside an ambient temperature range of 0° C to 45 °C (32° F to 113° F). It is recommended that the charger or docking station be operated at room temperature–between 18° C and 25° C (64° F to 77° F) for maximum performance.

After unpacking your unit:

•Visually inspect the charger for possible damage.

•Install the IEC power cord and apply power.

WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.0 User Manual 305