Psion Teklogix 8100107B user manual 25.1.8 EAN, UPC a, EAN-8 Zero Extend, UPC-A, Check Digit

Chapter 6: Settings

Decoded (Internal) Scanners

Suffix Char

This character, if non-zero, is added after a successfully decoded bar code. Press the key you want to insert in the dialog box attached to this parameter. The ASCII/Unicode key value of the keypress is displayed.

Strip Leading

This parameter determines the number of characters that will be removed from the beginning of the bar code before the prefix character is added.

Note: The appended character is treated as any other keyboard character. For example, if [BKSP] is pressed, the usual action for that key

is performed.

Strip Trailing

The value entered in this parameter determines the number of characters that will be removed from the end of the bar code before the suffix character is added.

6.25.1.8 EAN 8

Enabled

Set this parameter to on to enable “EAN 8”.

EAN-8 Zero Extend

When this parameter is enabled, five leading zeros are added to decoded EAN-8 symbols, making them compatible in format to EAN-13 symbols. Disabling this parameter returns EAN-8 symbols to their normal format.

Prefix/Suffix

Refer to page 149 for details.

6.25.1.9 UPC A

Enabled

Set this parameter to on to enable “UPC A”.

UPC-A, Check Digit

If you enable this parameter, the check digit is included with the decoded bar code data.

150WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.0 User Manual