Psion Teklogix 8100107B user manual General Maintenance, Caring For The Touchscreen

Chapter 3: Getting To Know The WORKABOUT PRO

General Maintenance

A hinged door at the top of the battery compartment protects the connectors.

Hinged SD door

SD/MMC

Card

Figure 3.8 Inserting the SD/MMC Card

•Lift the hinged SD door by gently pulling upward on the metal tab.

•Orient the SD/MMC card according to the legend stamped into the battery well plastic.

•Place the card in the slot with the card contacts down, and slide it inward until it latches into place.

•Swing the hinged door back into place.

To remove the card:

•Gently press it inward slightly until the detent unlatches, and the card is expelled from the slot.

3.12 General Maintenance

3.12.1 Caring For The Touchscreen

The top of the touchscreen is a thin, flexible polyester plastic sheet with a conductive coating on the inside. The polyester can be permanently damaged by harsh chemicals and is susceptible to abrasions and scratches. Using sharp objects on the touchscreen can scratch or cut the plastic, or crack the internal conductive coating.

The chemicals listed below must not come into contact with the touchscreen:

42WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.0 User Manual