Chapter 6: Settings

Imager

6.25.4.5 EAN 13

Enabled

Set this parameter to on to enable “EAN 13”.

Addendum

An addendum is a separate bar code, supplementary to the main bar code. This parameter provides three options: Disabled, Optional and Required. Depending on the value chosen for this parameter, an addendum is recognized or ignored.

Double-tap on Addendum to display a dialog box listing your options.

Highlight an item, and tap on OK.

When “Addendum” is set to Disabled, the scanner does not recognize an addendum. If this parameter is set to Optional, the scanner searches for an addendum and if one exists, appends it to the main bar code. When the parameter is set to Required, the scanner does not accept the main bar code without an addendum.

Note: Setting “Addendum” to ‘Optional’ reduces performance. It should only be chosen if at least some of the bar codes being read have addendums.

Prefix/Suffix

Refer to page 149 for details.

6.25.4.6 EAN 8

Enabled

Set this parameter to on to enable “EAN 8”.

Addendum

Refer to “Addendum” on page 200.

Prefix/Suffix

Refer to page 149 for details.

200WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.0 User Manual

Page 236
Image 236
Psion Teklogix 8100107B user manual 25.4.5 EAN, 25.4.6 EAN