Chapter 6: Settings

Modem Connection Setup

Stop Bits

This parameter specifies the number of stop bits1, 1.5, 2used for asynchronous communication.

Flow Control

This parameter selects the type of flow control used in your hand-held computer. The WORKABOUT PRO can perform Software or Hardware handshaking, or you can choose None.

Terminal

This option is similar to the HyperTerminal program capabilities on your PC.

TCP/IP Settings Tab

Important: If your server assigns IP addresses dynamically, you will not need to change these settings. If you need to make changes, contact your ISP or network administrator for addresses.

230WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.0 User Manual

Page 266
Image 266
Psion Teklogix 8100107B user manual Stop Bits, Flow Control, Terminal, TCP/IP Settings Tab