Psion Teklogix 8100107B user manual Concatenation, Enable Plessey

Chapter 6: Settings

Decoded (HHP)

Concatenation

“Codabar” supports symbol concatenation. When you enable Concatenation, the imager looks for a Codabar symbol with a “D” start character that is adjacent to a symbol with a “D” stop character. In this case, the two messages are concatenated into one with the “D” characters omitted.

Minimum And Maximum Length

The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Double-tapping on these parameters displays a screen in which you can set the minimum and maximum allowable code lengths – 2 to 60.

Field Size/Char

Refer to page 148 for details.

6.25.2.13 MSI Plessey

Enabled

Set this parameter to on to enable MSI.

Enable Plessey

Set this parameter to on to enable Plessey.

Check Char

When this parameter is set to Validate only, the integrity of the symbol is checked to ensure that it complies with specified algorithms.

If “Check Char” is set to Validate and Transmit, the check character is validated and transmitted with the data.

Setting this parameter to None disables this function.

Minimum And Maximum Length

These parameters apply to MSI bar codes. The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Double- tapping on these parameters displays a screen in which you can set the minimum and maximum allowable code lengths – 4 to 48.

WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.0 User Manual 167