Agilent Technologies E2625A, Option 100 Overview of the Mask Test Setup dialog box

Overview of the Mask Test Setup dialog box

Checkmark to

enable the

Mask Test.

Mask Test Setup

Dialog Box

Click to load a

Mask.

Click to align or

clear a Mask.

See the Infiniium help system to

use Scaling and Automask.

A Mask Test tab

will appear

when the

Mask Test

is enabled.

Click to start

and stop the

Mask Test.

Conditionally run

the Mask Test

and stop on the

first failure.

Check options to invert a

mask, use the file setup

when aligning a mask, or

enable averaging to

reduce noise.

Contents

Main In This Book Contents 1 Introduction to Option 100 and E2625A Telecommunications Mask Template Kit 2 Getting Started and Using Masks 3Standard Masks Page Page Introduction to Option 100 and E2625A Telecommunications Mask Template Kit Adding Option 100 to an existing Infiniium Oscilloscope 1-3 Introduction to Option 100 and E2625A Telecommunications Mask Template Kit Supplied items Supplied items The Option 100 Telecommunications Mask Template Kit contains the following items: Recommended accessories Other Agilent accessories recommended for use in mask testing include: What not to do Oscilloscope models You can use the Telecommunications Mask Template Kit with these Infiniium Oscilloscopes: Page 1-6 Overview of the Mask Test Setup dialog box Page Getting Started and Using Masks Introduction to Mask Testing Make a copy of the Mask Test disk To install the Standard Masks To calibrate the oscilloscope To choose a proper probe for Mask Testing To get your waveform on the oscilloscope display To enable the Mask Test To load a Mask To align a Mask to the waveform To start and stop the Mask Test To understand the Mask Test tab description area To run the Mask Test conditionally enabled. To stop the Mask Test on the first failure Page Standard Masks Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Safety Notices ! Notices