Agilent Technologies E2625A, Option 100 To install the Standard Masks

2-4

Getting Started and Using Masks

To install the Standard Masks

To install the Standard Masks

Use the copy of the Mask Test disk to install standard masks onto the Infiniium

hard drive. The Mask Test disk contains many of the available standard masks

that you may need to use during mask testing.

1Insert the copy of the Mask Test disk in the floppy drive.

2From the oscilloscope main menu, select Analyze, then Mask Test.

3In the Mask Test Setup dialog box, select the Enable Mask Test control.

4In the Mask Test Setup dialog box, click the Load Mask... button.

The Load Mask dialog box will resemble:

5Click the Install Masks from A: button.

This selects the disk

where the masks

are installed.

This selects the

directory where the

masks are installed.

Contents

Main In This Book Contents 1 Introduction to Option 100 and E2625A Telecommunications Mask Template Kit 2 Getting Started and Using Masks 3Standard Masks Page Page Introduction to Option 100 and E2625A Telecommunications Mask Template Kit Adding Option 100 to an existing Infiniium Oscilloscope 1-3 Introduction to Option 100 and E2625A Telecommunications Mask Template Kit Supplied items Supplied items The Option 100 Telecommunications Mask Template Kit contains the following items: Recommended accessories Other Agilent accessories recommended for use in mask testing include: What not to do Oscilloscope models You can use the Telecommunications Mask Template Kit with these Infiniium Oscilloscopes: Page 1-6 Overview of the Mask Test Setup dialog box Page Getting Started and Using Masks Introduction to Mask Testing Make a copy of the Mask Test disk To install the Standard Masks To calibrate the oscilloscope To choose a proper probe for Mask Testing To get your waveform on the oscilloscope display To enable the Mask Test To load a Mask To align a Mask to the waveform To start and stop the Mask Test To understand the Mask Test tab description area To run the Mask Test conditionally enabled. To stop the Mask Test on the first failure Page Standard Masks Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Safety Notices ! Notices