Agilent Technologies E2625A, Option 100 manual Contents

Contents

1Introduction to Option 100 and E2625A Telecommunications Mask Template Kit

Adding Option 100 to an existing Infiniium Oscilloscope 1-2

Supplied items	1-3
Recommended accessories 1-3
What not to do	1-3
Oscilloscope models		1-4
To access the Mask Test Setup dialog box							1-5
Overview of the Mask Test Setup dialog box							1-6
2 Getting Started and Using Masks
Introduction to Mask Testing			2-2
Make a copy of the Mask Test disk					2-3
To install the Standard Masks			2-4
To calibrate the oscilloscope			2-5
To choose a proper probe for Mask Testing							2-6
To get your waveform on the oscilloscope display								2-7
To enable the Mask Test 2-8
To load a Mask	2-9
To align a Mask to the waveform				2-10
To start and stop the Mask Test				2-11
To understand the Mask Test tab description area								2-12
To run the Mask Test conditionally					2-13
To stop the Mask Test on the first failure						2-14
3 Standard Masks
ITU G.703 International Standard Masks						3-4
ANSI T1.102 North American Standard Masks 3-11
FCC Part 68.308 Options A, B, and C Masks							3-17
Pre-Compliance SONET Masks				3-19
IEEE 802.3 Masks		3-21

Contents-1