Getting Started and Using Masks

To choose a proper probe for Mask Testing

To choose a proper probe for Mask Testing

You can use any oscilloscope probe that fits your application. Depending on the type of waveform you are testing, you may need to use one of the probe adapters.

Calibrating the probe adapter

Depending on the requirements of your Telecom or Datacom industrial standard, you may need to use the E2622A 75 probe adapter or the E2621A differential probe adaptor. Before performing a mask test, you should calibrate the probe adapter using the following instructions:

1In the Channel Setup dialog box, click the Probes... button.

2 In the Probes Setup dialog box, click the Calibration... button. 3 Follow the step-by-step instructions to calibrate the probe.

2-6

Page 16
Image 16
Agilent Technologies Option 100, E2625A manual To choose a proper probe for Mask Testing, Calibrating the probe adapter