CHANNEL SETUP OPTIONS
Channel Search
Use Channel Search to replace the existing Digital and Analog Channel Scan databases, such as, if you move to another city.
NOTES: To receive Digital Cable channels, you have to perform a Digital Cable Search.
To add new Digital channels to the existing database, use Digital
1 Press the TUNER key to select the Digital Tuner.
2 Press the MENU key to display the Main menu.
3 Use the CURSOR ▲▼ keys to highlight the Channel category. Press ENTER.
4 Use the CURSOR ▲▼ keys to highlight the Channel Search option. Press ENTER.
5 Use the CURSOR ▼ key to choose Yes. Press ENTER.
NOTE: After Channel Search is com- plete, the TV will tune to the lowest Digital Cable channel (or Digital D03 if no Digital channels are found).
➠
Digital Cable Search
(Optional)
This Plasma TV can receive unscram- bled (ClearQAM) Digital Cable Channels, when available. However, not all cable companies provide Clear- QAM digital channels.
Searching for Digital Cable Channels will take about 10 minutes, please be patient.
Channel numbers will appear under the progress bar only when a channel is found.
Program change from
cable company
To restore the digital antenna channel 6 choose Yes. Press ENTER. database, reconnect the antenna and use
Use the CURSOR ▼ key to
the menu system to perform a normal Channel Search.
1 Connect a Digital Cable signal directly to the TV’s Digital Antenna In terminal.
Digital
Cable Signal
DIGITAL | DIGITAL |
|
AUDIO | ANTENNA IN | UHF |
OUTPUT |
|
|
IMPORTANT FACT: This TV maintains only one database of digital channels. There- fore, when you search for ClearQAM digital cable channels, the database of digital antenna channels will be deleted. You will only be able to receive those ClearQAM channels your cable company provides.
Cable companies rearrange virtual chan- nels as programming changes, which may cause the program you are watching to move to another channel. This message will appear on the screen briefly to notify you of a change. You will have to relocate the program you were watching by scan- ning through the channels.
2
3
4 Use the CURSOR ▲▼ keys to highlight the Channel category. Press ENTER.
5 Use the CURSOR ▲▼ keys to highlight the Digital Cable Search option. Press ENTER.
➠
Channel Setup Options continued on next page.
17
