Sanyo DP42545 owner manual Glossary of Cable Types, TOP and Back Panels

GLOSSARY OF CABLE TYPES

Audio Cables—Provides analog left and right audio for your external equipment connections.

Composite Audio/Video (RCA type)—Use these cables for standard analog audio / video connections. Normally cables are color-coded: Yellow for Video, White for

(L) Audio, and Red for (R) Audio.

Component:Y, Pb, Pr—Use these cables to connect your component equipment. This connection provides the best picture, but does not include sound. (Cable colors: Y=green, Pb=blue, and Pr=red.)

Optical Audio—Use this cable to connect the TV’s digital audio output to a multi- channel audio receiver.

S-VideoCable—This cable provides sepa- rate luminance and color signals for higher resolution and better picture quality. Use this cable instead of the regular composite video cable (RCA type), when available.

Coaxial Cable—Use to connect a signal to your Digital or Analog RF Antenna In terminal.

NOTE: None of these cables are supplied with this Plasma TV.

TOP AND BACK PANELS

	Power key
Channel		Volume
		– + keys
▼▲ keys
CH	POWER	VOL

Top Panel (see items 8, 11, & 17 on page 15)

Back Panel (L)

Back Panel (R)

➀➁

DIGITAL

AUDIO

OUTPUT

➂➃

Back Panel (L)—Bottom View

DIGITAL	UHF/VHF/CATV
ANTENNAIN

➄ ➅ ➆ ➇ ➈ ➀ ➉

➅S-Video Input (Video 1)—To enhance video detail connect an S-Video cable to the S-Video jack instead of using the Video jack, if available on your external equipment. (S-Video connection will override connec- tion to the Video 1 input jack.)

➀Service Jacks—For production use only.

➁Digital Audio Output—Use an Optical Audio cable to connect the Digital Audio Output to an advanced stereo home theater system equipped with Dolby® Digital 5.1.

➂Digital Antenna Input—Connect an RF antenna coaxial cable to this terminal as shown on page 7.

➃Analog Antenna Input—Connect an RF antenna or the RF output from a VCR or Satellite Receiver to this terminal using a coaxial cable as shown on page 7.

➄Analog Audio Out (L/R) Jacks—Connect external audio equipment here. (See page 13.)

➆Audio/Video Input (Video 1)—Connect standard video equipment here using a composite audio / video cable (see page 12).

NOTE: S-Video connection overrides the Video 1 composite connection.

➇Component Video and Audio Input (COMPO 2 & COMPO 3)—Connect digital video equipment to the Y, Pb, Pr video and L/R audio jacks using a Component cable and an Audio cable.

➈Reset Button—Press this button to reset the TV’s digital microprocessor if the image “freezes” or “stalls.”

➉AC IN 120V—Connect power cord here. See page 8.

9