Psion Teklogix 8100107B Quad Docking Station-Model #WA4004-G1, Quad Docking Station Setup

Chapter 9: Peripheral Devices & Accessories

Quad Docking Station–Model #WA4004-G1

9.7 Quad Docking Station–Model #WA4004-G1

Figure 9.11 Quad Docking Station

Note: The quad docking station is shipped with a docking manual. It is critical that this manual be reviewed for additional information and updates.

The quad docking station permits each of four docked WORKABOUT PROs to communicate with a 10/100 BaseT Ethernet network at greater than 2Mbps. It also provides sufficient power to operate and fast charge the batteries in the units.

9.7.1 Quad Docking Station Setup

After unpacking the unit:

•Visually inspect the unit for any damage.

•Install the IEC power cord and apply power.

A green indicator in the lower-right corner of the front panel lights up to indicate that power is present.

•Attach a CAT5 RJ45 network patch cable (supplied) between your network and the RJ45 jack on the rear of the dock.

A green LED is illuminated next to the RJ45 connector when a valid network link is established.

316WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.0 User Manual