Table 9.6 | TCP/IP Configuration Information (3 of 4) | |
|
|
|
Message |
| Description |
|
| |
TFTP SERVER: | The IP address of the system where the TFTP | |
|
| configuration file is located. During initialization, the |
|
| temporary address 0.0.0.0 is displayed. |
|
| NOT SPECIFIED: Indicates that a TFTP server has not |
|
| been not been set. |
|
| |
CONFIG FILE: | The name of the HP Jetdirect configuration file. The file | |
|
| pathname may be truncated to fit on two lines. |
|
| NOT SPECIFIED: Indicates that a file was not specified in |
|
| the BOOTP reply from the host. |
|
| |
DOMAIN NAME: | The Domain Name System (DNS) name of the domain in | |
|
| which the HP Jetdirect print server resides (for example, |
|
| support.company.com). It is not the fully qualified DNS |
|
| name (for example, printer1.support.company.com) |
|
| because the host printer name is not included. |
|
| NOT SPECIFIED: Indicates that a domain name has not |
|
| been configured on the print server. |
|
| |
DNS SERVER: | The IP address of the Domain Name System (DNS) server. | |
|
| NOT SPECIFIED: Indicates that a DNS server’s IP address |
|
| has not been configured on the print server. |
|
| |
WINS SERVER: | The IP address of the Windows Internet Naming Service | |
|
| (WINS) server. |
|
| NOT SPECIFIED: Indicates that a WINS server’s IP |
|
| address has not been configured on the print server. |
|
| |
SYSLOG SERVER: | The IP address of the syslog server configured on the | |
|
| print server. |
|
| NOT SPECIFIED: Indicates that a syslog server has not |
|
| been configured. |
|
| |
IDLE TIMEOUT: | The timeout value expressed in seconds after which the | |
|
| print server closes an idle TCP print data connection. |
|
| Acceptable values are integers between 0 and 3600. A |
|
| value of zero turns off the timeout mechanism. The default |
|
| value is 270 seconds. |
|
|
|
SLP: |
| Specifies whether the HP Jetdirect print server sends |
|
| Service Location Protocol (SLP) packets used by system |
|
| applications for automated installation. |
|
| ENABLED: The print server sends SLP packets. |
|
| DISABLED: The print server does not send SLP packets. |
|
|
|
ENWW | HP Jetdirect Configuration Page 217 |
