HP 625n Gigabit Ethernet Print Server Mgmt. Protocols, Web Mgmt, IP Address Mask Description

Examples. See the table of sample entries below:

IP Address	Mask	Description
192.0.0.0	255.0.0.0	Allow all hosts with network number 192.
192.1.0.0	255.1.0.0	Allow all hosts on network 192, subnet 1.
192.168.1.2		Allow the host with IP address 192.168.1.2.
		The mask 255.255.255.255 is assumed and is
		not required.

To add an entry into the access control list, use the IP Address and Mask fields to specify a host, and click (check) the Save checkbox for that entry. Then click Apply.

To delete an entry from the list, clear the Save checkbox for that entry. Then click Apply.

To clear the entire access control list, clear all Save checkboxes, and click Apply.

Mgmt. Protocols

This link provides access to management communications and other protocols that affect security.

Web Mgmt.

Use this tab to manage communications with the embedded Web server from Web browsers. This tab appears only for full-featured print servers.

Secure, encrypted Web-based communication is provided through the Secure HTTP (HTTPS) protocol. If configured to require HTTPS, the embedded Web server routes HTTPS communications through port 443, the well-known port for HTTPS traffic. Although ports 80, 280, or 631 continue for Internet Printing Protocol (IPP) use, other non-secure communications (HTTP) are redirected to HTTPS. Redirection of your browser to use HTTPS may be transparent depending on your browser’s capabilities.

By factory default, the print servers are configured to allow HTTPS or HTTP.

ENWW Using the Embedded Web Server 146