HP 625n Gigabit Ethernet Print Server manual Using the Embedded Web Server

connection to your network. Click Apply to set, or Cancel to ignore, your configuration entries. To reset to factory-default values, click Reset to defaults.

Alternatively, you may choose to click the Use Wizard button at the top of the 802.11 page to configure your wireless network connection. This button will launch a configuration wizard that will guide you through the required 802.11 wireless configuration parameters and, depending on your choices, will bypass unnecessary parameters.

Note

Note

If you improperly exit the wizard (for example, by failing to use the Cancel button), an Operation Failed screen may appear. If so, wait approximately two minutes before entering the wizard again.

An HP Jetdirect wireless print server with factory-default settings (Ad Hoc mode) may be easily accessed by unauthorized clients. Therefore, it should not be powered on with factory-default settings longer than necessary, and any configuration changes that you make should be verified.

ENWW Using the Embedded Web Server 111