Table 4.11 Wizard Security Levels (2 of 2)
Security Level | Description |
|
|
Custom Security | This option proceeds through all available security settings |
| supported by your print server. For more information on |
| specific parameters and selections, see the tabs on the |
| Mgmt. Protocols and Authorization menu pages under |
| SECURITY. |
| The Administrator Account page is used to enter the |
| administrator password. |
| The Web Mgmt. page (for |
| is used for HTTPS (secure HTTP) configuration, including |
| certificates and encryption levels. |
| The Management Tools page allows configuration of |
| management protocols that are not secure (such as RCFG, |
| Telnet and FTP firmware updates). |
| SNMP Configuration pages are used to configure specific |
| SNMP settings: |
| ● Enable SNMPv1/v2: Enable this option to allow |
| management software that use SNMP v1/v2. If selected |
| the SNMPv1/v2 Configuration page is displayed to |
| configure SNMP community names. |
| ● Enable SNMPv3: |
| Enable this option to create an SNMP v3 account. |
| Creating an SNMP v3 account is not recommended if |
| you manage devices using HP Web Jetadmin. See |
| SNMP. |
| The Access Control page is used to set up an Access |
| Control List, if desired to control host access to the device. |
| The Print Protocols and Services page is used to enable |
| or disable network printing, print services, and device |
| discovery protocols that may affect security. |
| The Configuration Review page displays all the current |
| settings that may affect security. Click Finish to set your |
| basic security selections. |
|
|
ENWW | Using the Embedded Web Server 137 |
